NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 525
Multi Channel Recording - DAT
M-48
Operating Procedure (cont’d)
Hear service set tone when # is pressed. The service set tone continues for 3 seconds.
d.) Start your recording when the service set tone is stopped.
e.) Replace the handset to finish recording.
Note:
The recording length is a multiple of 2 (= 2n sec).
4.
Playback by designating RT
a.) Lift a handset; receive dial tone.
b.) Dial the MULTI CHANNEL RECORDING (REPLAY) access code from the station; receive
special dial tone.)
c.) Enter Route Number and press #; the special dial tone stops.
d.) A recorded message of the designated route is automatically played back.
RECORDING START
DDD 1
Recording Time
Note
RECORDING END
In 5 seconds
(Time Display)
REPLAY
(Time Display)
REPLAY
005
Route
REPLAY START
In 5 seconds
DDD 1
Replay Time
