NEAX2400 IPX Feature Programming Manual
Page 924
NDA-24297, Issue 1
I-16
Incoming Call Identification - CCIS
Programming (cont’d)
Index 8
Bit 0-Listed Directory Number
Bit 1-Incoming Station Call
Bit 2-Attendant Recall
Bit 3-FX
Bit 4-WATS
Bit 5-CCSA (DID)
Bit 6-TIE Line
Bit 7-Call Forwarding Busy Line
Index 9
Bit 0-Call Forwarding Don’t Answer
Bit 1-Call Forwarding Intercept
Bit 2-TF ASAT
Bit 3-Supervisory Call
Note:
System Data 2, Index 8, Bits 6 & 7, and System Data 2, Index 9, Bit 0-3 can be assigned different meaning
via the AAKP command.
STEP 2:
ARTD
- Flag the type of route in CDN 6:TCL, Trunk Class.
Bit 0-Not used
Bit 1-DDD Line (LDN)
Bit 2-FX Line (FX)
Bit 3-WATS Line (WATS)
Bit 4-TIE Line (TIE)
Bit 5-CCSA Line (CCSA)
Bit 6-Toll Line
Bit 7-CAS Line
Bit 8-Paging
Bit 9-Not used
Bit 10-Not used
Bit 11-general page
Bit 12-Radio Page
STEP 3:
AAKP
- This command may be used to change the meaning of the top six Call Identification keys of
the Attendant Console. (See System Data 2, Indexes 8 & 9). The following functions may be assigned
to Key Number (KYN) 1-6.
Function:
1-CAS
2-Off-Hook Alarm
3-Priority Call 1
4-Priority Call 2
5-Priority Call 3
