NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 583
Pushbutton to Rotary Conversion
P-6
Programming (cont’d)
902-ORT
913-TCFT for ATT
903-IRT
915- Night ATT
905-Sender 916-MFCR
909-DCFT 917-MFCS
919 to 926-Modem
TK:
Trunk Number
TN:
Tenant Number
RSC:
Route Restriction Class
SFC:
Service Feature Class
STEP 4:
ARTD
- Outgoing routes must be assigned as DP or DP/PB. Flag CDN 2:ONSG as data “1”, DP or
data “3”, DP/PB.
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
Note
STEP 1:
ARTDN
- Outgoing routes must be assigned as DP or DP/PB. Flag CDN 2:ONSG as data “1”, DP or
data “3”, DP/PB.
Note:
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
