NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 1035
Toll Restriction - 3/6-Digit - CCIS
T-26
Programming (cont’d)
This allows office codes 239, 465, & 798 to Area Code 914. All other office codes are automatically
restricted.
Note that this method of assignment allows office codes 239, 465 & 798 to any Area Code that is
assigned as TDI = 2 in ATDP.
For example, if the assignment for Area Code 718 was changed from TDI = 1 (allowed) to TDI = 2,
then the office codes 239, 465, & 798 would also be allowed for Area Code 718.
If different Office Codes are to be allowed in the 718 Area Code (for example 623 and 567) then the
assignments for 914 and 718 must be made as indicated in the ATDP Command.
ATDP Command -
TDM/OG:O (Outgoing Connection)
DAY/NIGHT:D (Day)
RSC:
3
OGRT:
1
DC:
919
TDI:
2 (Go to AARP Command)
NND: 3
TDM/OG:O (Outgoing Connection)
DAY/NIGHT: D (Day)
RSC:
3
OGRT:
1
DC:
917
TDI:
2 (Go to AARP Command)
NND: 3
This tells the system to check AARP tables for restrictions for all Area Codes beginning with 9 and 7.
AARP Command -
OGRT: 1 RSC: 3
FLAG:
2
DC:
914239
RES:
1 (Connection is Allowed)
DC:
914465
RES:
1 (Connection is Allowed)
DC:
914798
RES:
1 (Connection is Allowed)
OGRT: 1
RSC:
3
FLAG:
2
DC:
718623
RES:
1 (Connection is Allowed)
DC:
718567
RES:
1 (Connection is Allowed)
This allows just these office codes within these particular Area Codes. All other area codes beginning
with 7 or 9 are also restricted. If at this point allowing Area Code 714 is desired, assign AARP as
follows:
AARP Command -
OGRT: 1
RSC:
3
FLAG:
1
DC:
714
RES:
1 (Connection is Allowed)
Example 4 - RSC 4 Assignment
ATDP Command -
TDM/OG:
O (Outgoing Connection)
DAY/NIGHT: D (Day)
OGRT:
1
RSC:
3
DC:
92
TDI:
1 (Connection is Allowed)
Repeat these same assignments for Digit Codes (DC) 93 - 99 to allow all local office codes.
TDM/OG:
O (Outgoing Connection)
DAY/NIGHT: D (Day)
OGRT:
1
RSC:
4
