NEAX2400 IPX Feature Programming Manual
Page 544
NDA-24297, Issue 1
N-3
Non-delay Operation
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
STEP 1:
ARSCN
- Construct a Route Restriction Class (RSC) that will allow outgoing access to various routes
using the Route Restriction Index (RRI) 2 through the Attendant Console.
