NEAX2400 IPX Feature Programming Manual
Page 28
NDA-24297, Issue 1
A-19
Attendant Night Transfer
Service Conditions (cont’d)
12.
Programmed Night Stations can use CALL HOLD [C-6], CALL TRANSFER [C-10, 11] and THREE-
WAY CALLING [T-2], provided these features are programmed into the CLASS OF SERVICE -
INDIVIDUAL [C-15].
13.
Operator calls after Consultation Hold is not transferred to the Night Station.
14.
Individual Attendant calls are not transferred to the Night Station assigned by ATTENDANT NIGHT
TRANSFER.
15.
The Night Station can set CALL FORWARDING - ALL CALLS - OUTSIDE [C-28], CALL
FORWARDING - BUSY LINE - OUTSIDE [C-60], and CALL FORWARDING - DON'T ANSWER -
OUTSIDE [C-74].
16.
When a DIT call terminates to a station that has set CALL FORWARDING - ALL CALLS [C-5] to
Attendant, the call will be forwarded to a Night Station assigned by this service.
17.
In case a station places an incoming call on hold and calls an Attendant, this service is not activated and
the station receives reorder tone (including CALL FORWARDING - ALL CALLS [C-5] and CALL
FORWARDING - BUSY LINE [C-2]).
18.
An incoming call is transferred to a station in the same node that accommodates the calling station/trunk
in the FCCS network.
19.
A telephone number cannot be used (must be Physical Station Number).
Interactions
1.
There can be only one ATTENDANT NIGHT TRANSFER station per tenant.
2.
The ATTENDANT NIGHT TRANSFER telephone number must be programmed using the
MAINTENANCE ADMINISTRATION TERMINAL [M-18] (MAT). This telephone number may be the
same number as the NIGHT CONNECTION-FIXED/FLEXIBLE [N-1, N-2] number, but each must be
individually assigned. PRIORITY CALL [P-9] and OFF-HOOK ALARM [O-6] calls cannot be answered
by the ATTENDANT NIGHT TRANSFER station.
3.
Stations CALL FORWARDING [C-2,3,5] calls to the operator (dial 0) will be directed to the
ATTENDANT NIGHT TRANSFER station.
4.
CALL WAITING [C-12]: This feature cannot be activated at the ATTENDANT NIGHT TRANSFER
station for operator directed (dial 0) calls.
5.
STATION HUNTING [S-7,8,9]: If the ATTENDANT NIGHT TRANSFER station is in a station hunting
group and all stations in the group are busy, the call will wait in queue at the ATTENDANT NIGHT
TRANSFER station and will be answered by the first available station in the hunt group.
6.
A telephone number cannot be used (must be Physical Station Number).
Programming
STEP 1:
ASID
- Assign the Tenant, Group Number (GN) 1-7, and Function (F) = 3, ATTENDANT NIGHT
TRANSFER. Assign the point of destination as a station, and assign the station number.
STEP 2:
ASGD
- Assignment is not required. All stations in the tenant group will be affected.
