NEC N8100-14522F, User Manual

Page: 127 / 320

Installing the Operating System with Express Setup 5-5
Optional Board Supported by NEC EXPRESSBUILDER
NEC EXPRESSBUILDER attached to this computer supports the following optional boards:
NOTE:
If you want to install the other boards except ones listed
below by using a driver floppy disk ("OEM-FD for Mass storage
device"), see "Exceptional setup" and "Installing Optional Mass
Storage Driver" of "Parameter File Creator" in Chapter 6.
„
Controllers supporting installation of OS with Express Setup
– N8103-116 RAID controller (128 MB, RAID0/1)*
– N8103-117 RAID controller (128 MB, RAID0/1/5/6)*
– N8103-118 RAID controller (256 MB, RAID0/1/5/6)*
– Onboard RAID controller (LSI Embedded MegaRAID)
„
Other controllers
– N8103-75 SCSI Controller*
– N8103-95 SCSI Controller*
– N8103-107 SCSI Controller*
– N8103-104 SAS Controller*
* Option.
NOTES:
„
The driver of option card mentioned above is stored in the
EXPRESSBUILDER DVD.
„
If you use the board not mentioned above, the ExpressSetup will
fail. Refer to the instructions attached to the board.
About the Hardware Components
When you install the Windows Server 2003, Express Setup requires several preparations if this
computer uses the following hardware components.