NEC N8100-14522F, User Manual

Page: 216 / 320

8-26 Troubleshooting
Problems with Express Setup
The system partition is created by size smaller than specified value.
→
In Express Setup, there are some cases that the system partition is created by size
about 8MB smaller than specified size.
It is not a problem in operating the system.
Following message appeared when you tried to install Express Setup to the hard disk drive
that has smaller capacity than the specified partition size:
The creating of the partition was failed.
The process can not be continued. The process was stopped.
O K
→
Cannot continue the setup.
Specify smaller partition size than the capacity of connected hard disk drive, and
then retry the setup.
Specified to join the Domain, but the system is installed as Workgroup:
→
When the setup fails to join the Domain during the installation, it will install the
system as Workgroup. Open [System] in Control Panel to specify joining the Domain.
Unable to specify the details of Network adapter:
→
In Express Setup, you can not specify the details of Network adapter. Specify them
from Control Panel after starting Windows.
Problems with Parameter File Creator
Fail to start Parameter File Creator:
T
Parameter File Creator requires to run by "Microsoft(R) HTML Application host".
→
If Parameter File Creator does not start, associate the file type with "Microsoft(R)
HTML Application host" via following process.
1) Click [Run] on Start menu.
2) Type "%windir%\system32\mshta.exe /register" in the [Open] box, and click
[OK].