NEC N8100-14522F, User Manual

Page: 134 / 320

5-12 Installing the Operating System with Express Setup
6.
Select the installing Operating System.
Select [Install the Windows (32bit editions)] from the menu, click [Next].
7.
Enter the setting of a logical drive.
[Enter RAID settings] steps are displayed. Confirm the parameters, modify if necessary,
and then click [Next].
IMPORTANT: Be sure to perform Consistency Check for the RAID
drives configured by Express Setup.
NOTES:
„
You can use only the physical devices that have same model
number to configure logical drive.
„
If the process is not finished normally, the driver may not be stored
in the EXPRESSBUILDER. See "Optional Board Supported by
NEC EXPRESSBUILDER" described earlier in this chapter.