NEC N8100-14522F, User Manual

Page: 80 / 320

4-12 Configuring Your Server
Advanced
Option Parameter Description Your Setting
Boot-time Diagnostic
Screen Enabled
[Disabled] When enabled, the BIOS will display
the POST execution screen.
When disabled, the BIOS will display
the NEC logo during POST.
Cannot be disabled during Console
Redirection.
Reset Configuration Data [No]
Yes Select "Yes" if you want to clear the
system configuration data at the next
boot. Automatically reset to "No" in
the next boot.
NumLock On
[Off] Specify whether the numlock is
enabled or disabled on booting.
Memory/Processor Error [Boot]
Halt If "Halt" is selected, the boot is
stopped when POST detected a
processor or memory error.
[ ]: Factory-set
IMPORTANT:
Be sure to take a note of boot priority before selecting
"Yes" for [Reset Configuration Data], because the information on boot
device will be cleared. Select [Exit Saving Changes] to reboot the
system, run BIOS SETUP utility, and provide settings for boot device
order again.