NEC N8100-14522F, User Manual

Page: 66 / 320

3-16 Setting Up Your Server
To connect the power cord from the server to an interruptive power supply (UPS), use outlet socket
on the rear of the UPS. Refer to the manual that comes with the UPS for details.
When the power cord from the server to a UPS, change the BIOS setup of the server to link with
power supply from the UPS.
Change a parameter for "AC-LINK" under the Server menu of the BIOS SETUP utility. See Chapter
4 for details.
Option slot
Reset button for
overload prevention
Outlet socket
Computer interface port (COM)
Voltage sensitivity setting button
Input connector
(NEMAL5-15P)
Connector for TVSS device
Computer interface port (COM)