Configuring Your System 3-13
Advanced
Move the cursor onto "Advanced" to display the Advanced menu. Each menu item preceded by "
8
"
mark has its submenus. Select an option with the "
8
" mark and press
Enter
to display its submenu.
See the table below for setup options on the screen.
Option Parameter
Description
Your
Setting
Boot-time
Diagnostic Screen
[Disabled]
Enabled
Specify whether normal POST messages are
displayed or not during boot.
If this option is set to “Disabled”, the OEM
logo is displayed instead of POST messages
(press ESC to display the POST messages).
Reset
Configuration Data
[No]
Yes
Select "Yes" to clear the configuration data
(system information stored by POST). The
parameter "No" will be resumed when the
server restarts.
NumLock On
[Off]
Enable or disable the Numlock function at
system start-up.
Memory/Processor
Error
[Boot]
Halt
The boot up operation pauses at the end of
POST if a memory error or a CPU error
occurs.
[ ]: Factory-set
IMPORTANT
:
!
If Reset Configuration Data is set to "Yes", boot device priority is also
cleared. Take a note of boot device priority before changing the
parameter. Restart the server with Exit Saving Changes option, start
BIOS SETUP utility, and restore the boot device priority.
Summary of Contents for EXPRESS5800/120MF
