![background image](http://html.mh-extra.com/html/nec/express5800-120mf/express5800-120mf_user-manual_251193136.webp)
3-38 Configuring Your System
The following table lists submenu items, available parameters, and descriptions.
Submenu item
Parameter
Description
Reset SCSI Bus at
IC Initialization
[Enabled]
Disabled
Select "Enabled".
Display <Ctrl><A>
Message During
BIOS Initialization
[Enabled]
Disabled
Select "Enabled".
Extended Int 13
Translation for DOS
Drives > 1 GByte
[Enabled]
Disabled
Select "Enabled".
POST Display
Mode
Verbose
Silent
[Diagnostic]
Select "Diagnostic".
SCSI Controller Int
13 Support
[Enabled]
Disabled: NOT Scan
Disabled: scan bus
Enable or disable SCSI BIOS.
Select "Enabled" for most cases other than
the following:
•
To boot the OS from a hard disk
connected to an optional SCSI controller.
(If the optional SCSI controller has no hard
disks connected, however, select
"Enabled".)
•
BIOS the SCSI controller may be
disabled to reserve an area in the
expansion ROM space if the controller has
no hard disks connected.
Domain Validation
[Enabled]
Disabled
Select "Enabled".
Support Removable
Disks under Int 13
as Fixed Disks
Boot Only
All Disks
[Disabled]
AIC-79xx BIOS automatically controls the
removable disks.
BIOS Support for
Bootable CD-ROM
[Enabled]
Disabled
Select "Enabled".
[ ]: Factory-set
!
HostRAID
Move the cursor onto "HostRAID" and press
Enter
to choose the HostRAID option.
Submenu item
Parameter
Description
HostRAID Enabled
[Disabled]
Select "Disabled".
Summary of Contents for EXPRESS5800/120MF
