![background image](http://html.mh-extra.com/html/nec/express5800-120mf/express5800-120mf_user-manual_251193223.webp)
Troubleshooting 6-9
POST Error Codes and Messages (continued)
Error Code and Message
Description
Action
0B90 BMC
Platform
Information Area
Corrupted
The platform information area of
BMC is damaged.
0B91 BMC
update
firmware corrupted
Possible BMC errors.
0B92
Internal use area of
BMC FRU corrupted
Possible BMC errors.
All the commands and functions
other than the FRU command
and the EMP function can be
used. This is not a fatal error.
Turn off the power once and
then on again to restart the
server. If the error cannot be
corrected, contact your service
representative.
0B93 BMC
SDR
Repository empty
No BMC SDR data exists.
Turn off the power once and
then on again to restart the
server. If the error cannot be
corrected, contact your service
representative.
0B94
IPMB signal lines do
not repond
All the functions other than the
function of accessing to SMC
through IPMB can be used. This
is not a fatal error. Turn off the
power once and then on again
to restart the server. If the error
cannot be corrected, contact
your service representative.
0B95
BMC FRU device
failure
Access to SROM that contains the
chassis information failed.
All the commands and functions
other than the FRU command
and the EMP function can be
used. This is not a fatal error.
Turn off the power once and
then on again to restart the
server. If the error cannot be
corrected, contact your service
representative.
0B96 BMC
SDR
Repository failure
Access to FMEM sector that
contains SDR information failed.
0B97
BMC SEL device
failure
0B98
BMC RAM test error
Possible BMC errors.
Turn off the power once and
then on again to restart the
server. If the error cannot be
corrected, contact your service
representative.
Summary of Contents for EXPRESS5800/120MF
