![background image](http://html.mh-extra.com/html/nec/express5800-120mf/express5800-120mf_user-manual_251193120.webp)
3-22 Configuring Your System
See the table below for the items.
Option Parameter
Description
Your
Setting
User Password Is: Clear
Status only, user cannot modifiy. Once
set, this can be disabled by setting it to
a null string, or by clearing password
jumper on system board (see
Configuring System Board Jumpers
later in this chapter).
Supervisor
Password Is:
Clear
Status only, user cannot modifiy. Once
set, this can be disabled by setting it to
a null string, or by clearing password
jumper on system board (see
Configuring System Board Jumpers
later in this chapter).
Set User
Password
Up to seven
alphanumerics
Press
Enter
to display the user
password entry screen. With a user
password, accessible SETUP menus
are restricted. This option is available
only if the Supervisor Password is
specified.
Set Supervisor
Password
Up to seven
alphanumerics
Press
Enter
to display the supervisor
(or administrator) password entry
screen. With the supervisor password,
all SETUP menus are available for
access. This option is available only
when you log into the SETUP utility
with the supervisor password.
Password on boot
[Disabled]
Enabled
Specify whether to request a password
entry at boot-up. Supervisor password
setup is required beforehand. When
the supervisor password is specified
and this option is disabled, the BIOS
assumes that a system boot attempt is
made by a user.
Fixed disk boot
sector
[Normal]
Write Protect
Prevents data from being written to
IDE hard disks. The server does not
support IDE hard disks.
Secure Mode
Timer
2 min
5 min
10 min
20 min
1 hr
[2 hr]
Set the period from no input from the
keyboard or mouse to the point at
which the system enters into the
secure mode.
Hot Key
(CTRL+ALT+)
[L]
Specify the hot key to invoke secure
mode features. Pressing the assigned
key along with
Ctrl
and
Alt
invokes
secure mode. This option is enabled
when User Password is set.
Secure Mode Boot [Disabled]
Enabled
Specify whether the system boots in
secure mode. This option is enabled
when User Password is set.
Video Blanking
[Disabled]
Enabled
Specify whether to turn off the
monitor when secure mode is
activated.
Floppy Write
Protect
[Disabled]
Enabled
Specify whether data write to the
floppy disk inserted into the floppy disk
drive is enabled or disabled in secure
mode.
Summary of Contents for EXPRESS5800/120MF
