![background image](http://html.mh-extra.com/html/nec/express5800-120mf/express5800-120mf_user-manual_251193195.webp)
Installing the Operating System and Utilities 4-55
Remote Control
MWA on a management PC can be used to send the following power control commands to the
server remotely.
!
Power ON
!
Power OFF
!
Power Cycle
!
Reset
!
OS Shutdown*
*
ESMPRO Agent in the server must be supported and the remote OS shutdown function
must be enabled.
Remote Information Collection
MWA on a management PC can be used to collect the following information remotely.
!
IPMI information (System Event Log, Sensor Data Record, Field Replaceable Unit)
!
Panel information (Power state, LCD, System Watchdog, Watchdog interval, Power on
hours)
!
BMC setting information
Linkage with ESMPRO
When MWA receives an alert from BMC on the server, it analyzes the alert and automatically
registers to the alert log of ESMPRO.
NOTE:
This function is available only for the management PC connected to
the server via LAN.
System Requirements
Hardware/Software requirements for MWA are as follows.
!
Management PC (a PC running MWA)
MWA is applicable on the management PC running under Windows OS.
See the "MWA First Step Guide" for details.
!
Express5800 server to be remotely maintained by MWA
The server is equipped with the RomPilot or BMC feature.
Your server is equipped with BMC (IPMI Ver. 1.5).
Summary of Contents for EXPRESS5800/120MF
