Mitsubishi L26CPU-BT, User Manual

Page: 203 / 450

9 - 20 9 - 20
9. DEDICATED INSTRUCTIONS AND PROGRAMMING
9.1.5 G(P).RISEND
The G(P).RISEND instruction automatically performs handshaking with an intelligent
device station and writes data to the buffer memory of the specified intelligent device
station.
Available for modules that have signals for the handshake (e.g. AJ65BT-R2N).
Usable devices
Internal device
(System, user) Link direct device
J \
Constant
Set data
Bit Word
File
register
Bit Word
Intelligent
function
module
device
U \G
Index
register
Z
K, H S
Other
(S1) — — — — —
(S2) — — — — —
(S3) — — — — —
(D) — — — —
G.RISEND
Un
Command
G.RISEND
GP.RISEND Un
Command
GP.RISEND
(S3)
(S3)
(S1) (S2)
(S1) (S2)
(D)
(D)
[Instruction
symbol]
[Execution
condition]
Set data
Device
1
Description Setting range Data type
Un
Start I/O number of the module
(First 2 digits of I/O No. with three digits)
0 to FE
H
Binary 16 bits
(S1) Start number of the device in which control data is stored.
Within the range of the
specified device
(S2) Start number of the device to which write data is to be stored.
Within the range of the
specified device
(S3)
Start number of the device in which the interlock signals are
stored. Within the range of the
specified device
Device name
(D)
Device that is turned ON for one scan upon completion of
writing. (D)+1 also turns ON at an abnormal completion. Within the range of the
specified device
Bit
1 The file register of each of the local device and the program cannot be used as a device for setting data.