Mitsubishi L26CPU-BT, User Manual

Page: 78 / 450

7 - 6 7 - 6
7 PARAMETER SETTINGS
Item Description
Master
station
Local
station
Standby
Master
station
Reference
Special Relay (SB)
Set the link special relay (SB) refresh device.
Default value: Blank
Setting range: Device name - Select from M, L, B, D, W, R, SB or ZR.
Device number - Within the range of the device points that
the CPU has.
――
Special Register (SW)
Set the link special register (SW) refresh device.
Default value: Blank
Setting range: Device name - Select from M, L, B, D, W, R, SW or ZR.
Device number - Within the range of the device points that
the CPU has.
――
Retry Count
Sets the number of retries when a communication error occurs.
Default value: 3 (times)
Setting range: 1 to 7 (times)
――
Automatic Reconnection
Station Count
Set the number of modules that can return to the system operation by a
single link scan
Default value: 1 (module)
Setting range: 1 to 10 (modules)
Section
8.2.2
Standby Master Station
No.
Set the station number for the standby master station.
Default value: Blank (No standby master station specified)
Setting range: Blank, 1 to 64 (Blank: No standby master station specified)
Section
8.2.7
PLC Down Select
Set the data link status when a master station programmable controller
CPU error occurs.
Default value: Stop
Setting range: Stop
Continue
Section
8.2.3,
Section
8.2.6
Scan Mode Setting
Set whether the link scan for the sequence scan is synchronous or
asynchronous.
Default value: Asynchronous
Setting range: Asynchronous
Synchronous
Section
8.3.7
Delay Time Setting Set 0. ――
: Available, : Not available