Mitsubishi L26CPU-BT, User Manual

Page: 216 / 450

9 - 33 9 - 33
9. DEDICATED INSTRUCTIONS AND PROGRAMMING
Slave station setting data
Device Item Set data Setting range Set by
The type of slave station, number of occupied slave stations
and station number are set as follows.
b15 b12 b11 b8 b7 b0
Station number
Number of occupied slave stations
Type of slave station
to to to
The default parameter settings are "0101
H
to 0140
H
" (station
number: 1 to 64, number of occupied slave stations: 1, type
of slave station: remote I/O station).
—
Setting of the station number
1 to 64 (BIN setting)
1 to 40
H
Setting of the number of occupied slave stations
Number of occupied
slave stations
Setting
Station 1 1
H
Station 2 2
H
Station 3 3
H
Station 4 4
H
1 to 4
H
Setting of the type of slave station Ver.1compatible remote
device station
4
Type of slave station Setting
Ver.1compatible remote I/O station
0
H
Ver.1compatible remote device station 1
H
Ver.1compatible intelligent device station 2
H
Ver.2 compatible single remote device station 5
H
Ver.2 compatible single intelligent device
station
6
H
Ver.2 compatible double remote device station 8
H
Ver.2 compatible double intelligent device
station
9
H
Ver.2 compatible quadruple remote device
station
B
H
Ver.2 compatible quadruple intelligent device
station
C
H
Ver.2 compatible octuple remote device station E
H
Ver.2 compatible octuple intelligent device
station
F
H
(S2) + 0
to
(S2) + 63
Setting for 1 to 64
modules
3
0 to F
H
User
3: Perform the settings for as many connected modules involved in communication as has been specified by the control
data.
4: Setting a value outside the setting range in the slave station type setting results in abnormal completion.