Mitsubishi L26CPU-BT, User Manual, Page: 369 / 450

App - 5 App - 5
APPENDIXES
Address
Hex. Dec.
Item Description
D4
H
to D7
H
212 to 215
16-point remote
I/O station setting
Stores the station numbers of the remote I/O stations set as 16
points in the remote I/O station points setting.
1, 2
Default value: 0 (no setting)
Storage area: Bit corresponding to the station number turns on.
D8
H
to DB
H
216 to 219
0 points reserved
station setting
Stores the station numbers of the reserved stations set to 0 points.
1
Default value: 0 (no setting)
Storage area: Bit corresponding to the station number turns on.
DC
H
to DF
H
220 to 223 (Use prohibited) —
1 Used in the remote net ver.2 mode or remote net additional mode.
2 When the setting is "8 8 Points (Reserved)", the station numbers are stored into both the 8-
point remote I/O station setting and 16-point remote I/O station setting.
(2) Remote input (RX) and remote output (RY)
Used when the remote net ver.1 mode or remote net additional mode is selected.
(a) Master station remote I/O station/remote device station/local station
1) Master station
The input status from the remote I/O station, remote device station
(RX) and local station (RY) is stored.
Two words are used per station.
2) Local station
Data to be sent to the master station is stored in the remote output
(RY) of the address corresponding to the host station number.
The input status from the remote I/O station, remote device station
(RX) and other local station is stored.
Two words are used per station.
E0
H
RX F to RX 0
E1
H
E2
H
E3
H
E4
H
E5
H
E6
H
E7
H
E8
H
E9
H
15C
H
RX 1F to RX 10
RX 2F to RX 20
RX 3F to RX 30
RX 4F to RX 40
RX 5F to RX 50
RX 6F to RX 60
RX 7F to RX 70
RX 8F to RX 80
RX 9D to RX 90
RX7CF to RX7C0
RX7DF to RX7D0
RX7EF to RX7E0
RX7FF to RX7F0
Address
Remote input (RX)
X0F to X00
X1F to X10
Master station
Remote I/O station
(Station number 1: occupies 1 station)
160
H
161
H
162
H
163
H
164
H
165
H
166
H
167
H
168
H
169
H
1DC
H
1DD
H
1DE
H
1DF
H
Address
RY F to RY 0
RY 1F to RY 10
RY 2F to RY 20
RY 3F to RY 30
RY 4F to RY 40
RY 5F to RY 50
RY 6F to RY 60
RY 7F to RY 70
RY 8F to RY 80
RY 9D to RY 90
RY7CF to RY7C0
RY7DF to RY7D0
RY7EF to RY7E0
RY7FF to RY7F0
Remote output (RY)
Local station
(Station number 2: occupies 4 stations)
15D
H
15E
H
15F
H
For station
number 1
… The last two bits cannot be used for communication between the master
station and the local station.
(In the example below, RY9E and RY9F cannot be used.)
For station
number 2
For station
number 3
For station
number 4
For station
number 5
For station
number 63
For station
number 64
to to to to
For station
number 1
For station
number 2
For station
number 3
For station
number 4
For station
number 5
For station
number 63
For station
number 64