Mitsubishi L26CPU-BT, User Manual

Page: 220 / 450

9 - 37 9 - 37
9. DEDICATED INSTRUCTIONS AND PROGRAMMING
(C) There are two types or interlock signals for the G(P).RLPASET instruction:
the completion device (D) and status display device at completion (D) + 1.
1) Completion device
Turns ON in the END Processing of the scan where the
G(P).RLPASET instruction is completed, and turns OFF in the next
END processing.
2) Status display device at completion
Turns On and OFF depending on the completion status of the
G(P).RLPASET instruction.
Normal completion : Stays OFF and does not change.
Abnormal completion : Turns ON in the END processing of the scan
where the G(P).RLPASET instruction is
completed, and turns OFF in the next END
processing.
(D) After executing the G(P).RLPASET instruction, turn on SB0003
(refresh instruction) to refresh cyclic data.
[When all the stations are normal]
Data link stop
Status display device
at completion
Complete device
G(P).RLPASET instruction
Direction device
Data link stop complete
(SB0045)
Data link stop
(SB0002)
Refresh instruction
(SB0003)
Host data link status
(X01)
Program
END
processing
END
processing
END
processing
END
processing
END
processing
END
processing
END
processing
Refresh stop
ON
Abnormal completion
ON
Refresh start
Data link start
G(P).RLPASET
instruction
completion
1 scan