Mitsubishi L26CPU-BT, User Manual

Page: 214 / 450

9 - 31 9 - 31
9. DEDICATED INSTRUCTIONS AND PROGRAMMING
9.1.8 G(P).RLPASET
The G(P).RLPASET instruction sets network parameters to the master station and
starts the data link.
Usable devices
Internal device
(System, user) Link direct device
J \
Constant
Set data
Bit Word
File
register
Bit Word
Intelligent
function
module
device
U \G
Index
register
Z
K, H S
Other
(S1) — — — — —
(S2) — — — — —
(S3) — — — — —
(S4) — — — — —
(S5) — — — — —
(D) — — — —
Command
[Execution
condition] [Instruction
symbol]
Command
G.RLPASET Un G.RLPASET (S1) (S2) (S3) (S4) (S5) (D)
GP.RLPASET GP.RLPASET Un (S1) (S2) (S3) (S4) (S5) (D)
Master station set data
Device
1
Description Setting range Data type
Un
Start I/O number of the module
(First 2 digits of I/O No. with three digits)
0 to FE
H
Binary 16 bits
(S1) Start number of the device in which control data is stared.
Within the range of the
specified device
(S2)
2
Start number of the device in which slave station setting data
is stored. Within the range of the
specified device
(S3)
2
Start number of the device in which reserved station
specification data is stored. Within the range of the
specified device
(S4)
2
Start number of the device in which error invalid station
specification data is stored. Within the range of the
specified device
(S5)
2
Start number of the device in which send, receive and
automatic refresh buffer assignment data is stored. Within the range of the
specified device
Device name
(D)
Device that is turned ON for one scan upon completion of
reading.
(D)+1 also turns ON at an abnormal completion.
Within the range of the
specified device
Bit
1 The file register of each of the local device and the program cannot be used as a device for setting data.
2 When the setting data for (S2) to (S5) are not to be set, specify a dummy device.