Mitsubishi L26CPU-BT, User Manual

Page: 82 / 450

7 - 10 7 - 10
7 PARAMETER SETTINGS
7.2.1 Operation setting
The following shows the Operation Setting screen.
The following shows the setting items of the Operation Setting screen.
Item Description
Master
station
Local
station
Standby
Master
station
Reference
Parameter Name
Set the Parameter name. (Even if the Parameter name is not set, this will
not affect the operation of the CC-Link system).
Default value: Blank
Setting range: 8 characters or less
――
Data Link Disorder
Station Setting
Set the input status for the data link error station.
Default value: Clear (“Hold Input Data” not checked)
Setting range: Hold (“Hold Input Data” checked)
Clear (“Hold Input Data” not checked)
Section
8.2.4,
Section
8.2.6
Case of CPU STOP
Setting
Set the slave station refresh/compulsory clear setting at programmable
controller CPU STOP.
Default value: Refresh (“Clears Compulsorily” not checked)
Setting range: Refresh (“Clears Compulsorily” not checked)
Clears compulsorily (“Clears Compulsorily” checked)
Section
8.2.5,
Section
8.2.6
Number of Exclusive
Stations
Set the number of occupied local stations and occupied standby master
stations.
Default value: Exclusive Station 1
Setting range: Exclusive Station 1
Exclusive Station 2
Exclusive Station 3
Exclusive Station 4
――
Block Data Assurance
per Station
Set the block guarantee of cyclic data per station.
Default value: Disable (“Enable Setting” not checked)
Setting range: Disable (“Enable Setting” not checked)
Enable (“Enable Setting” checked)
Section
8.2.9
: Available, : Not available