Mitsubishi L26CPU-BT, User Manual

Page: 426 / 450

App - 62 App - 62
APPENDIXES
Appendix 4.11 Link refresh time of master station/local station
This section indicates the link refresh time of the master/local station (increase of END
processing time at the programmable controller CPU).
(1) Remote net ver.1 mode, remote net ver.2 mode
[Expression]
KM1+(KM2+KM3) E+(No. of CC-Link modules-1) KM4 [ms]
E= RX+RY+SB
16
+RWw+RWr+SW
RX : Total points of the remote input (RX) refreshed by the master/local
station
RY : Total points of the remote output (RY) refreshed by the master/local
station
RWw : Total points of the remote register (RWw) refreshed by the master/local
station
RWr : Total points of the remote register (RWr) refreshed by the master/local
station
SB : Total points of the link special relay (SB) refreshed by the master/local
station
SW : Total points of the link special register (SW) refreshed by the
master/local station
KM1, KM2, KM3, KM4 : Constant
KM1
CPU type
Master
station/
Local station
With block
guarantee of cyclic
data per station
function set
Without block
guarantee of cyclic
data per station
function set
KM2 ( 10
-3
) KM3 ( 10
-3
) KM4
Master station 0.42 0.32
L02CPU
Local station 0.70 0.60
0.38 0.05 0.2
Master station 0.25 0.13
L26CPU-BT
Local station 0.43 0.30
0.23 0.03 0.2
Master station 0.38 0.20 Head
module
Local station 0.65 0.45
0.35 0.05 0.2
POINT
The number of CC-Link modules in the expression includes the built-in CC-Link
function.
(Example) When using the L26CPU-BT and the LJ61BT11 is mounted, the number
of CC-Link modules counted is two.