manualshive.com logo in svg

Mitsubishi L26CPU-BT, User Manual

The Mitsubishi L26CPU-BT is a high-performance programmable logic controller (PLC) designed for industrial automation. Its user manual, available for free download at manualshive.com, provides comprehensive instructions on setup, programming, and troubleshooting. Ensure seamless operation of your Mitsubishi PLC by accessing the manual today.

Share
Download
background image

Index -  1                                                                                                                                               Index -  1 

 

INDEX

 

[A] 

Applicable system .......................................... 5- 3 
Automatic CC-Link startup............................ 8-63 
Automatic return function .............................. 8-23 
Automatic update buffer............................App-16 
 

[B] 

Block guarantee of cyclic data per station.... 8-47 
Buffer memory list ......................................... 3-20 
 

[C] 

CC-Link diagnostics .................................... 15-33 
CC-Link ver. installation/parameter matching 
status .........................................................App-38 
Communication buffer...............................App-15 
Communication between the master station and 
intelligent device stations ............................. 13- 1 
Communication with intelligent device stations 

....................................................................... 8-15 

Communication with local stations ................ 8- 8 
Communication with remote device stations 

........................................................................ 8- 3 

Communication with remote I/O stations 

........................................................................ 8- 1 

Compatible CC-Link ver. information .......App-38 
Completion status of remote device station 
initialization procedure ..............................App-24 
Connectable modules .................................... 5- 3 
Connection cable............................................ 3- 1 
Connecting modules ...................................... 6- 5 
CPU monitoring time setting .....................App-29 
Creating a check sheet ............................... 15-40 
Current link scan time ...............................App-32 
Cyclic transmission........................................A-16 
 

[D] 

Data link processing time..........................App-40 
Data link restart .........................................App-22 
Data link restart acceptance .....................App-23 
Data link restart complete .........................App-23 
Data link restart result ...............................App-29 
Data link status setting in case of master station 
programmable controller CPU failure ........... 8-24 
Data link stop.............................................App-22 
 

 
Data link stop acceptance ........................ App-23 
Data link stop complete ............................ App-23 
Data link stop result .................................. App-29 
Data link stop/restart......................................8-73 
Dedicated instruction list.................................9- 1 
Dedicated instructions ....................................9- 1 
Delay timer information............................. App-32 
Detailed LED display status........ App-30, App-31 
Details of the I/O signals............................. App-1 
Differences between the L series master/local 
module and QJ61BT11N.......................... App-67 
 

[E] 

EMC ............................................................... A- 8 
Error codes...................................................15-19 
Error history of the module ..........................15-20 
Error invalid station setting function ..............8-66 
Error invalid station specified status 

..................................................... App-25, App-33 

Event issuance for the interrupt program......8-60 
Example of communication between the master 
station and local stations ..............................12- 1 
Example of communication between the master 
station and remote device stations...............11- 1 
Example of communication between the master 
station and remove I/O stations....................10- 1 
Execution status of remote device station 
initialization procedure .............................. App-24 
Expanded cyclic setting .................................3-13 
External dimensions ................................. App-74 

 

[F] 

Faulty station occurs at certain transmission 
speeds..........................................................15-18 
Faulty stations cannot be detected .............15-18 
Forced master switching........................... App-23 
Forced master switching instruction result 

................................................................... App-31 

Forced master switching request 
acknowledgement..................................... App-24 
Forced master switching request complete 

................................................................... App-24 

Function list .....................................................3- 8 
Functions.........................................................8- 1 

 

Ind 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for L26CPU-BT



































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for L26CPU-BT

GE Concord express Instruction Manual preview
Concord express
Brand: GE Pages: 3
Samsung SolarCell Remote Instructions preview
SolarCell Remote
Brand: Samsung Pages: 2
Samsung MWR-SH11N Installation Manual preview
MWR-SH11N
Brand: Samsung Pages: 20
Abus FUMO50110 Quick Manual preview
FUMO50110
Brand: Abus Pages: 12
GARAN EWS-102 Calibration & Setup preview
EWS-102
Brand: GARAN Pages: 8
Gamma Vacuum SPCe User Manual preview
SPCe
Brand: Gamma Vacuum Pages: 25
Gamma DIGITEL MPCq User Manual preview
DIGITEL MPCq
Brand: Gamma Pages: 28
SAI HVAC Compact Comfort VAV12 User Manual preview
Compact Comfort VAV12
Brand: SAI HVAC Pages: 16
Saitek Pacific AV8R Manual preview
Pacific AV8R
Brand: Saitek Pages: 15
saia-burgess PCD3 Series Hardware Manual preview
PCD3 Series
Brand: saia-burgess Pages: 203
Sailor N420 Technical Manual preview
N420
Brand: Sailor Pages: 1
Taco Electronic Solutions iWorx MPU2 Installation Manual preview
iWorx MPU2
Brand: Taco Electronic Solutions Pages: 28
Valcom V-2000 Manual preview
V-2000
Brand: Valcom Pages: 6
OJ Electronics OJ-Air2-WP55 Instructions Manual preview
OJ-Air2-WP55
Brand: OJ Electronics Pages: 8
Linak CBH Advanced User Manual preview
CBH Advanced
Brand: Linak Pages: 33
Topway LMT070DICFWD-NJN User Manual preview
LMT070DICFWD-NJN
Brand: Topway Pages: 34
Carrier AQUASNAP 30RA "B" Operation & Maintenance Instructions Manual preview
AQUASNAP 30RA "B"
Brand: Carrier Pages: 36
Identiv Freedom Bridge FB3 Installation Manual preview
Freedom Bridge FB3
Brand: Identiv Pages: 2

Brands by name

Popular brands

Load more brands