Mitsubishi FX2N-10GM, Hardware / Programming Manual

Page: 155 / 274

FX Series Positioning Controllers Program format 5
5-45
5.9 Application instruction format
In this manual, each application instruction is expressed as follows.
c
Applicable models
The models in which the described instruction is available are indicated.
The models are classified into the FX
2N
-10GM and the FX
2N
-20GM. "
z
" is added to the
applicable series.
Remarks;
9
: Can be used
×
: Not use
d
Instruction body
An application instruction is specified by the function No. FNC 00 to the FNC 93. To each
instruction, a symbol (mnemonic or instruction symbol) which represents the contents is
assigned. For example, "MOV" is assigned to the FNC 12.
Some application instructions only require the instruction body. In most cases, however, the
instruction body is combined with one or more operands which follow it.
e
Operands
The operands specify the condition and the contents required to execute the instruction.
Specify the operands in the order stated.
S: Source
The operands whose contents are not changed by execution of the instruction are called
sources and are identified by the symbol (S). If a source operand can be indexed (as
described later), it is followed by "
x
" and indicated as (S
x
). When there are two or more
sources, they are indicted as (S1
x
), (S2
x
), etc.
D: Destination
The operands whose contents are changed by execution of the instruction are called desti-
nations and are identified by the symbol (D). If a destination operand can be indexed (as
described later), it is followed by "
x
" and indicated as (D
x
). When there are two or more des-
tinations, they are indicted as (D1
x
), (D2
x
), etc.
n: Constant
The operands for which only constant K or H can be specified are indicated as "n". When
there are two or more constants, they are indicated as n1, n2, etc.
FNC 10
MOV
Applicable models
Series name
16-bit operation
5 steps
32-bit operation
8 steps
Remarks
K,H KnX KnY KnM D V,Z
Applicable
devices
and basic
format
Word
devices
FNC 12
MOV
FX
2N
-10GM
FX
2N
-20GM
COMPARE M O V [D] M O V
S·
Transfer
Reference Reference
S· D·
When the drive input is ON, the
content of the is transmitted
to the without any
change.When the drive input is
OFF, the contents of the do
not change.
S·
D·
D·
Drive input
➀
Applicable models
➅
Description
➄
Execution format
➃
Applicable
devices
➁
Instruction
body
➂
Operands