Mitsubishi FX2N-10GM, Hardware / Programming Manual

Page: 184 / 274

FX Series Positioning Controllers Special auxiliary relays and Special data registers 6
6-8
Attribute
R: This data register can be used only for read. You should not write it.
R/W: This data register can be used both for write and read. When reading or writing data,
use a 16-bit instruction for a data register classified as "S", or a 32-bit instruction for a
data register classified as "D".
*1 In simultaneous 2-axis mode (available only in the FX
2N
-20GM), the special D for the X axis
is valid and the special D for the Y axis is ignored.
*2 In simultaneous 2-axis mode (available only in the FX
2N
-20GM), the same data is saved in
the special D for the X axis and the special D for the Y axis.
*3 Not defined in the FX
2N
-10GM.
Special data registers for current position data
Special data registers "D9005 and D9004" and "D9015 and D9014" shown in the previous
page store the current position data based on the practical unit set in PARA. 3.
You can write numeric data to these data registers while the positioning unit is ready (in the
AUTO or MANU mode) and is not waiting for remaining distance drive. When writing data, use
32-bit instructions.
On the other hand, special data registers "D9075 and D9074" and "D9095 and D9094" indi-
cating the current position converted into pulses can be used only for read, and their data auto-
matically changes in accordance with changes in the data stored in data registers "D9005 and
D9004" and "D9015 and D9014".
    
D9140
R/W
[S]
Index register. V0
    
D9141 Index register. V1
    
D9142 Index register. V2
    
D9143 Index register. V3
    
D9144 Index register. V4
    
D9145 Index register. V5
    
D9146 Index register. V6
    
D9147 Index register. V7
   
D9149 D9148
[D]
Index register. Z0
   
D9151 D9150 Index register. Z1
   
D9153 D9152 Index register. Z2
   
D9155 D9154 Index register. Z3
   
D9157 D9156 Index register. Z4
   
D9159 D9158 Index register. Z5
   
D9161 D9160 Index register. Z6
   
D9163 D9162 Index register. Z7
D9164 to D9199

Not defined.
Table 6.3: Special data registers list
X axis Y axis Subtask Attribute
Description
Upper Lower Upper Lower Upper Lower
Direction of
forwarding
Instruc-
tion form