Mitsubishi FX2N-10GM, Hardware / Programming Manual

Page: 268 / 274

FX Series Positioning Controllers Appendix 12
12-4
Table 12.3: I / O control parameters
PARA No. Description X axis set value Y axis set value
30 Program No. specification method
31 Head input No. for DSW time- sharing reading
32 Head output No. for DSW time- sharing reading
33 DSW reading interval
34 RDY output valid
35 RDY output No.
36 m code external output valid
37 m code external output No.
38 m code OFF specification input No.
39 Manual pulse generator
40
Multiplying factor per pulse gene- rated by man-
ual pulse generator
41 Division rate for multiplied result
42 Head input No. for manual pulse generator enable
43
to
49
Vacant
50 ABS interface
51 Head input No. for ABS
52 Head output No. for ABS control
53 Single-step operation
54 Single-step mode input No.
55 Vacant
56 General purpose input declaration for FWD/RVS/ZRN
Table 12.4: System parameters
PARA No. Description Value
100 Memory size
101 File registers
102 Battery status
103 Battery status output No.
104 Subtask start
105 Subtask start input No.
106 Subtask stop
107 Subtask stop input No.
108 Subtask error
109 Subtask error output
110 Subtask single-step/cyclic operation
111 Subtask single-step/cyclic operation input No.