Mindray DP-50 Exp Vet, Operator'S Manual

Page: 98 / 343

5-30 Image Optimization
2. Obtain a 2D image.
3. Press <3D/4D> key or user-defined key for [3D] to enter the Smart 3D imaging
preparation status, and define the ROI as well as the curved VOI.
4. Select a render mode.
5. Select an acquisition method, and set the corresponding parameters on the soft menu.
Rocked mode: set [Angle] parameter.
Linear mode: set [Distance] parameter.
6. Press <Update> on the control panel to start the 3D image acquisition.
The system enters the 3D image viewing status when the acquisition is complete. Or,
end the acquisition by pressing <Freeze> or <Update> on the control panel.
In image viewing status, operations such as VOI setting and image editing can be performed.
7. Exit Smart 3D.
Press <Update> or <Freeze> to return to Smart 3D image acquisition preparation. Or,
press <B>, <3D/4D> key or user-defined key for [3D] to exit Smart 3D.
5.10.3.2 Smart 3D Acquisition Preparation
In Smart 3D mode, you need to set the scan method.

Method
Capture images using Linear scan or Rocked scan.

Linear scanning
Move the probe across the surface. See the following figure.

Rocked scanning
Rotate the probe once from the left to the right side (or from the right to the left) to
include the entire desired region. See the figure.

Description of parameters:

Description of parameters:
Type Parameter Description
Parameter
adjusting
Angle
Function: to set the angle the probe covered during a fan
sweep.
Quality
Function: to adjust the image quality by changing the line
density. Image quality can affect the imaging speed: the
better the image quality, the longer the time.
Render Mode Surface
Function: set Surface as the 3D image rendering mode.
This is useful for surface imaging, such as fetus face, hand
or foot.
Tip: you may have to adjust the threshold to obtain a clear
body boundary.