Mindray DP-50 Exp Vet, Operator'S Manual

Page: 158 / 343

10-10 DICOM

If the verification succeeds, it will prompt “xxx Verify Succeed”.
 Otherwise, it prompts “xxx Verify Failed”.
If verification failed, the possible causes may be:

The ultrasound
machine can’t communicate normally with the server. Please check if
the cable is properly connected; or,
Check if the IP of the server is configured in the same segment with that of the
ultrasound machine; or,
Check if the network adapter, the router, the exchanger or the HUB are normally
working.

The server does not support the verification. If the connection is normal, it can be
concluded that the server does not support the verification.

The server supports the verification, but this function is not activated. Please check if
the verification function is activated.
Note:
Not all the SCPs can support verification; please consult SCP belongings to confirm whether
SCP can support this service. If not, the verification won’t pass.
10.3 DICOM Service
If the system is configured with DICOM modules, and connected to the relevant DICOM
servers, after verifying connection, you can perform storage, print, Worklist, MPPS, storage
commitment, and query/ retrieve applications.
10.3.1 DICOM Storage
DICOM Storage is used to send image(s) to DICOM storage server f
or storage.

Send image in iStation/Review/main screens
(1) Select image(s)

Press <iStation> to enter the iStation screen, click to select an exam record in the list,
where thumbnails are displayed in the thumbnail area in the lower part of the screen,
and then click to select a thumbnail or several thumbnails. Or,

Press <Review> to enter the Review screen, click to select an image or several
images. Or,

On the main screen, select
a thumbnail or several thumbnails.
(2) Select a saved image in the iStaion, Review or main screen, and click on the
right side of the image. The following dialogue box pops up: