Mindray DP-50 Exp Vet, Operator'S Manual

Page: 66 / 343

4-10 Exam Preparation
4.4 Selecting Imaging Mode
Use the corresponding key in the control panel to enter the imaging modes.
For the detailed operations in each imaging mode, please refer to “5 Image Optimization”.
4.5 Activate& Continue an Exam
4.5.1 Activate an Exam
Select an exam finished within 24 hours, select the exam record, click from the menu
popped up; or, click [Active Exam] in “iStation” or “Review” screen to activate the exam.
Note:

The system can automatically load the animal information and exam data to continue
the exam.

If you want to continue an exam which data lies in an external memory database, you
have to first allow the system to load the animal data to the system
’s animal database.
4.5.2 Continue an Exam
Select an exam paused within 24 hours, select the exam record in iStation screen,
click from the menu popped up to continue the exam.
If you want to continue an exam which data lies in an external memory database, you have
to first allow the system to load the animal data to the system
’s animal database.
4.6 Pause & End an Exam
4.6.1 Pause and Exam

Sometimes, you have to stop an uncompleted exam due to some special causes. When
the exam is paused, the system can begin other exams.
1. Press <Patient> to enter "Animal Info" screen.
2. Click [Pause Exam].

If the system is powered off during scanning, the exam status turns "paused" after the
system restart.
Only one exam can be paused every time.
When an exam is paused, the system will:
1. Saves the exam-related images, reports and measurement data, modifies the status as
“
Paused
”
.
2. Save the exam information, including report, imaging mode, exam mode, image
parameters, operation mode, imaging / measurement data and so on.