Mindray DP-50 Exp Vet, Operator'S Manual

Page: 219 / 343

Probes and Biopsy 12-39
NOTE: The high-pressure steam/ immersion sterilization do not affect the bracket duration
life, and the duration life is affected by the daily application of the bracket. Please
check the appearance of the bracket before using.
12.2.10 Storage and Transportation
 Don’t use the carrying case for storing the needle-guided bracket. If the carrying case is
used for storage, it may become a source of infection.

Between examinations, keep the needle-guided bracket in a sterile environment.

When the needle-guided bracket is sent to your MINDRAY representative for repair, be
sure to disinfect or sterilize it and keep it in the carrying case to prevent infection.

Sterilize the carrying case as necessary.

Store or transport the needle-guided bracket under the following ambient conditions:

Ambient temperature: -20°C ~ 55°C

Relative humidity: 30% to 95% (no condensation)
12.2.11 Disposal
Be sure to dispose the needle-guided bracket only after sterilizing it.
Contact your MINDRAY representative when disposing of this device.
12.3 Middle Line
“Middle Line” helps to locate the focus point of lithotrity wave during lithotrity treatment. By
watching the procedure of lithotrity in real-time and adjusting the intension and frequency of
the lithotrity wave, the harm to the animals can be reduced to the least.

To enter lithotrity mode: in B mode, click [Middle Line] in the image menu at the left side
of the screen to turn on the lithotrity.

In middle line mode:

The middle line is a vertical straight line located in the middle of the screen, the
position and direction of which cannot be changed.

The middle line
mark is a “×” mark located on the middle line, which can be moved
up and down along the middle line by rolling the track ball.

The depth of the mark is displayed in the image parameter area at the right side of
the screen.