METRODATA NetTESTER FAMILY USER MANUAL
76-02-107 Rev.A
Page 75 of 133
The unit supports management access via SNMP v1 or v2c, which may be
configured using the SNMP menu,
SNMP
Read community public
Write community public
Trap community public
Managers <menu>
contact Person Metrodata Limited,Laxton House,C
rabtree Office Village,Eversley
Way,Egham,Surrey,England,Tel. +4
Node name NT1005
Location Test Network
Stats <display>
trap Alarms <menu>
14.1.10.1 Communities
Menu Tree: Main Set-Up /
S
ettings / S
N
MP /
R
ead community
Main Set-Up /
S
ettings / S
N
MP /
W
rite community
Main Set-Up /
S
ettings / S
N
MP /
T
rap community
The unit supports separate communities for Read, Write and Trap access.
Communities provide a limited level of security within SNMP as only requests with
the correct community name will be actioned.
By default, all communities are set to
public
.
The community names must be changed to match those used by the network
management system.
14.1.10.2 Managers
Menu Tree: Main Set-Up /
S
ettings / S
N
MP /
M
anagers
The unit supports up to 4 separate SNMP Managers which may be configured using
the
“managers” menu system. Only SNMP polls and get/set requests from
configured managers will be accepted.
The managers menu is as below:
MANAGERS
1 - 192.168.100.45 <menu>
2 - 192.168.100.70 <menu>
Add manager <menu>
Here there are two managers currently configured which may be selected for
viewing, editing by typing the manager number, in this case 1 which will then display
the parameters for this manager:
14.1.10.2.1 SNMP Manager Settings
Menu Tree: Main Set-Up /
S
ettings / S
N
MP /
M
anagers / [manager]
