METRODATA NetTESTER FAMILY USER MANUAL
76-02-107 Rev.A
Page 131 of 133
APPENDIX D
MULTI-LEVEL LOGIN
A 'Multi-Level Login' system is available that expands on the basic password system.
This allows for 6 users, arranged hierachically, with the privileges of each user being
a superset of the one below. Level 0 (the lowest privilege level) is equivalent to the
basic system 'View' user, and Level 6 to the Admin user.
The Multi-Level system also enables the use of a username in addition to the
password during the login process.
Changing from the default 'basic password' to the multi-level login system must be
done via the advanced mode user interface.
When the multi-level login system is in use, most of the admin-level privileges from
basic password mode are afforded to levels 1-5, whilst level 0 corresponds to 'view'-
level access. There are, however, a few exceptions, where a minimum access level
other than 1 is required. These are listed in the table below.
Level
Privilege
2
Read (group) access to files via SFTP
6
Write (owner) access to files via SFTP
6
View/modify usernames for other levels
6
Change passwords for other levels
6
Switch to basic password system (advanced mode)
6
Create/modify/remove SLA definitions
