METRODATA NetTESTER FAMILY USER MANUAL
76-02-107 Rev.A
Page 21 of 133
2 INSTALLATION
2.1 Rack-Mounting
The NT1003 and NT1005 are standalone, desktop units. However, they may be
mounted in a standard 19-inch rack using the appropriate rack mounting kit. One or
two single-supply units may be mounted in a 1U rack space using the mounting kit
part number 80-05-256.
Figure 2.1 Rack-mounting NT1003 or NT1005
To mount the NT1003 or NT1005 in the 19-inch rack mount adaptor first remove the
two M3x12 screws and washers from the rear panel of the unit. Then align the unit
rear panel with the mounting bracket and secure the unit to the adaptor using the
previously removed screws.
One dual-supply NT1005 can be mounted in a 1U space in a similar manner using
rack mount adaptor 80-05-260, as shown below.
