METRODATA NetTESTER FAMILY USER MANUAL
76-02-107 Rev.A
Page 121 of 133
The Unit Description will contain the name of the corresponding EDD product (see
APPENDIX E) rather than that of the NetTESTER.
14.5.4.8 Delete file
Menu Tree:
Main Set-Up / M
A
intenance / Soft
W
are File /
D
elete file
During a normal software upgrade cycle, the unit will be restarted, and this will
automatically delete the temporary software file. If, however, a file is transferred to
the unit and is not used to update the unit's software, or the restart is to be delayed,
then the file should be manually deleted once it is no longer needed. This frees
internal resources and allows the unit to begin storing performance statistics once
more.
14.5.5
Save Settings
Menu Tree:
Main Set-Up / M
A
intenance /
S
ave Settings
This command copies the current (running) configuration of the unit to the non-
volatile configuration store. Any previously stored configuration will be replaced. The
stored settings will be used to configure the unit when it performs a warm start. Refer
to section 3 for more about configuration management.
