METRODATA NetTESTER FAMILY USER MANUAL
76-02-107 Rev.A
Page 76 of 133
1 - 192.168.100.45
IP address 192.168.100.45
interFace LAN1
Access rights Read-Write
receives Traps Yes
snmp Version SNMPv2c
Remove manager
14.1.10.2.1.1 IP Address
Menu Tree: Main Set-Up /
S
ettings / S
N
MP /
M
anagers / [manager] /
I
P Address
An IP address is required for the manager. Note that the routing table must be
configured where this is not on the same subnet as the unit.
14.1.10.2.1.2 Access Rights
Menu Tree: Main Set-Up /
S
ettings / S
N
MP /
M
anagers / [manager] /
A
ccess Rights
The manager configuration controls the access rights that the manager has, which
may be
None
,
Read-Only
, or
Read-Write
.
14.1.10.2.1.3 Receives Traps
Menu Tree: Main Set-Up /
S
ettings / S
N
MP /
M
anagers / [manager] / Receives
T
raps
The manager may also be set up for traps. If enabled, the unit will generate traps
destined for this manager when alarm events occur.
14.1.10.2.1.4 SNMP Version
Menu Tree: Main Set-Up /
S
ettings / S
N
MP /
M
anagers / [manager] / SNMP
V
ersion
The unit supports SNMP v1 or v2c, which can be selected on a per-manager basis.
14.1.10.2.1.5 Remove Manager
Menu Tree: Main Set-Up /
S
ettings / S
N
MP /
M
anagers / [manager] /
R
emove Manager
If a manager is no longer required, then it may be removed.
14.1.10.3 Contact Person
Menu Tree: Main Set-Up /
S
ettings / S
N
MP / Contact
P
erson
The SNMP Contact person is the RFC1213 MIB-2 SysContact object. This item is a
string of up to 255 characters.
14.1.10.4 Node Name
Menu Tree: Main Set-Up /
S
ettings / S
N
MP /
N
ode Name
The SNMP Node Name is the MIB-2 SysName object. This item is a string of up to
255 characters.
14.1.10.5 Location
Menu Tree: Main Set-Up /
S
ettings / S
N
MP /
L
ocation
