Metrodata NetTESTER NT1003 User Manual Download Page 108

Page: 108 / 133

METRODATA NetTESTER FAMILY USER MANUAL

76-02-107 Rev.A

Page 108 of 133

The default setting is 3 seconds.

14.3.5

SLA Settings

Menu Tree: Main Set-Up /

erf Monitoring / [peer] / S

The SLA menu is as shown below:

  PM PEER #1 SLA

  Sla       1 "Gold Service 1G"

  sLa alarms <menu>

14.3.5.1 SLA

Menu Tree: Main Set-Up /

erf Monitoring / [peer] / S

A /

The SLA menu allows the SLA to be selected for the session.

14.3.5.2 SLA Alarms

Menu Tree: Main Set-Up /

erf Monitoring / [peer] / S

A / S

A Alarms

Alarms may be generated when the measured performance fails to comply with any
of the 4 SLA performance parameters.

  SLA ALARMS

  Availability <menu>
  Flr <menu>
  fTd <menu>
  Ifdv <menu>

Each parameter has a similar menu allowing the operation of the alarm to be
configured.

  SLA ALARM, AVAILABILITY

  Sla alarm   Enabled
  Integration period 24 hours
  min Data 24 hours

14.3.5.2.1

Alarm Enable

Menu Tree: Main Set-Up /

erf Monitoring / [peer] / S

A / S

A Alarms / [param] /

LA Alarm

Controls whether SLA alarms are generated for this parameter.

14.3.5.2.2

Integration Period

Menu Tree: Main Set-Up /

erf Monitoring / [peer] / S

A / S

A Alarms /

vailability /

ntegration

Period

The integration period defines the time period over which the performance is
averaged. The options are:

Summary of Contents for NetTESTER NT1003






































































































































Search results

Summary of Contents for NetTESTER NT1003

Reviews:

Related manuals for NetTESTER NT1003

Brands by name

Popular brands

Metrodata NetTESTER NT1003, User Manual

Search results

Summary of Contents for NetTESTER NT1003

Reviews:

Related manuals for NetTESTER NT1003

Brands by name

Popular brands