METRODATA NetTESTER FAMILY USER MANUAL
76-02-107 Rev.A
Page 72 of 133
WELCOME SCREEN
--------------
********************************
* *
* Metrodata NetTESTER NT10G05 *
* *
Welcome *
* Please Log In... *
* *
********************************
<Esc> - exit, <Enter> - refresh
14.1.8.4 Advanced Mode
Menu Tree: Main Set-Up /
S
ettings /
A
ccess Control /
A
dvanced Mode
14.1.9
Management Interface
Menu Tree: Main Set-Up /
S
ettings /
M
gmt Interface
MGMT INTERFACE (MGMT)
admin Status Up
Dhcp On
ip addr 10.1.1.217
net mask 255.255.255.0
Routing table <menu>
rEmote mgmt Disabled
tFtp server 10.1.1.12
interface MGMT
Time server 10.1.1.12
interface MGMT
14.1.9.1 Admin Status
Menu Tree: Main Set-Up /
S
ettings /
M
gmt Interface
/
Admin
S
tatus
The interface is enabled by setting the Admin Status to Up. Note that the associated
port or flow must be enabled first.
14.1.9.2 DHCP
Menu Tree: Main Set-Up /
S
ettings /
M
gmt Interface /
D
HCP
DHCP allows the unit to get an IP address automatically from a centrally
administered server.
DHCP can be enabled, or disabled where the IP address must be manually
configured on each unit.
When DHCP is enabled, a unit powers up and broadcasts a DHCP request for an
address. Once a server hears the request, it will respond with an address the unit
can use.
