METRODATA NetTESTER FAMILY USER MANUAL
76-02-107 Rev.A
Page 64 of 133
14.1.3.6 Negotiated
Menu Tree: Main Set-Up /
S
ettings /
W
AN Port / Negotiated
When auto negotiation is enabled, the negotiated display item shows the operating
mode that has be negotiated between the link partners.
10M/HD
10 Base T / Half Duplex
10M/FD
10 Base T / Full Duplex
100M/HD
100 Base T / Half Duplex
100M/FD
100 Base T / Full Duplex
1000M/HD
1000 Base T / Half Duplex
1000M/FD
1000 Base T / Full Duplex
14.1.4
User Port (NT1005/NT10G05)
Menu Tree: Main Set-Up /
S
ettings /
U
ser Port
The user port, where supported, is configured via a menu similar to WAN port (see
sections 14.1.1 - 14.1.3).
An additional value of
None
is available for the interface selection (see section
14.1.5
SLA definition (single SLA mode)
Menu Tree: Main Set-Up /
S
ettings / S
L
A
The SLA editing menu is shown below:
SLA
Name SLA1
Bandwidth <menu>
Flr 0.04%
ftD 100ms
ifdV 10ms
Availability 99%
Ses threshold 25%
delay Percentile 95
Mtu 1518
Colour marking <menu>
mUltiple slas
14.1.5.1 Name
Menu Tree: Main Set-Up /
S
ettings / S
L
A /
N
ame
To identify the SLA, it may be given a meaningful name. Within the flow, PM and
Test menus, the SLA will be identified by this name as well as its number.
