METRODATA NetTESTER FAMILY USER MANUAL
76-02-107 Rev.A
Page 70 of 133
14.1.7.7 Time Zone
Menu Tree: Main Set-Up /
S
ettings / Unit
I
nfo /
T
ime/Date / time
Z
one
Since NTP uses GMT as the baseline time, time zone adjustment is required to
enable the correct time to be displayed wherever the unit is deployed globally, and to
allow for daylight saving.
The time zone may be set in the range +/-12 hours from GMT.
14.1.7.8 Sync to Server
Menu Tree: Main Set-Up /
S
ettings / Unit
I
nfo /
T
ime/Date /
S
ync to Server
Though the unit will automatically synchronise with the server on a regular basis, it is
possible for the user to force a manual synchronisation by issuing a Sync Now
command.
Following power up, the NTP standard calls for a random delay before the NTP client
will request sync from the server, manual sync can be used to speed this process up
if necessary.
14.1.8
Access Control
Menu Tree: Main Set-Up /
S
ettings /
A
ccess Control
ACCESS CONTROL
Password *******
'View' user Enabled
Welcome screen <menu>
Advanced mode
14.1.8.1 Password
Menu Tree: Main Set-Up /
S
ettings /
A
ccess Control /
P
assword
To change the unit password, select
Password
. The unit will display the following:
Enter new password
Enter>
Enter the new password, which may contain between 4 and 32 printable characters.
Passwords are case-sensitive.
For security each character
is shown on screen as an asterisk “*”. Once the new
password is entered the display changes to:
