METRODATA NetTESTER FAMILY USER MANUAL
76-02-107 Rev.A
Page 95 of 133
COLOUR & PCP
Colour marking PCP
Green pcp 4
Yellow pcp 0
14.2.6.5.2.1 Colour Marking, Green/Yellow PCP
Menu Tree: Main Set-Up /
T
esting /
S
AM Tester /
P
eer /
C
olour Marking
Menu Tree: Main Set-Up /
T
esting /
S
AM Tester /
P
eer /
G
reen PCP
Menu Tree: Main Set-Up /
T
esting /
S
AM Tester /
P
eer /
Y
ellow PCP
In order to perform colour-aware testing, the method of marking generated packets
as green or yellow must be specified. Note that this is separate, but should be
compatible with, the method of identifying colour-marking, which forms part of the
SLA.
14.2.6.6 Test Peer (Layer 2)
Menu Tree: Main Set-Up /
T
esting /
S
AM Tester /
P
eer
The peer menu for a Layer 2 peer is shown below:
PEER, TEST CHANNEL 1
Layer L2
Flow 1 "mgmt"
C-vlan 1
Direction Network
coloUr & pcp <menu>
discoVer peers
peer Name (magic mac)
Mac address 00:c0:81:ff:00:00
mac mOdifier Loopback, Network side
14.2.6.6.1
Flow
Menu Tree: Main Set-Up /
T
esting /
S
AM Tester /
P
eer /
F
low
A Layer 2 test peer must be allocated to a flow. This will define the basic parameters
such as S-Tag, and also selects the pool of remote peers detected through the MDP
discovery process.
The flow is a toggle item, allowing the user to scroll through the list of available
options.
14.2.6.6.2
C-VLAN
Menu Tree: Main Set-Up /
T
esting /
S
AM Tester /
P
eer /
C
-VLAN
This setting defaults to the control VLAN defined for the flow. It may be changed
manually to test other VLANs within the flow.
