DTC U3003:08/U3003:16/U3003:17 [DYNAMIC STABILITY CONTROL (DSC)]
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id0402b2902000.html[1/7/13 9:30:55 AM]
2013 - CX-5 - Brakes
DTC U3003:08/U3003:16/U3003:17 [DYNAMIC STABILITY CONTROL (DSC)]
DTC
U3003:08,
U3003:16,
U3003:17
Power supply system
DETECTION
CONDITION
U3003:08
While the vehicle is traveling at a speed of
10km/h {6.2
mph} or more
, a CAN signal error caused by low power
supply voltage is detected.
U3003:16
Low ignition voltage (
7.9—9.6 V
) is detected at the voltage
monitor of the solenoid valve or motor monitor. (Except
engine cranking condition)
Low ignition voltage (
6.0—7.9 V
) is detected at the voltage
monitor of the solenoid valve or motor monitor.
Low ignition voltage (
below 6.0 V
) is detected at the
voltage monitor of the solenoid valve or motor monitor.
U3003:17
High ignition voltage (
17 V or more
) is detected at the
voltage monitor of the solenoid valve or motor monitor.
U3003:08
Permits the control and does not illuminate each
warning/indicator light.
U3003:16
Illuminates the ABS warning light and TCS/DSC indicator
light.
Does not illuminate the brake warning light.
*1
Illuminates the brake warning light.
*2*3
Tire pressure monitoring system warning light illuminates
after flashes.
Inhibits the ABS, TCS, DSC, roll over mitigation (ROM),
brake assist control, hill launch assist (HLA), and TPMS
