DTC U2101:00/U2300:52/U2300:54/U2300:55/U2300:56/U2300:64 [DYNAMIC STABILITY CONTROL (DSC)]
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id0402b2905800.html[1/7/13 9:30:49 AM]
2013 - CX-5 - Brakes
DTC U2101:00/U2300:52/U2300:54/U2300:55/U2300:56/U2300:64 [DYNAMIC STABILITY
CONTROL (DSC)]
DTCU2101:00, U2300:52, U2300:54,
U2300:55, U2300:56, U2300:64 Configuration data not recorded
DETECTION
CONDITION
DSC CM detects configuration data not record or data error
FAIL-SAFE
FUNCTION
Illuminates the ABS warning light and TCS/DSC indicator light.
Tire pressure monitoring system warning light illuminates after flashes.
Inhibits the ABS, TCS, DSC, roll over mitigation (ROM), brake assist
control, hill launch assist (HLA), and TPMS controls.
POSSIBLE
CAUSE
Module configuration procedure is not done properly
Correct data cannot be received from instrument cluster
Another vehicles control modules been installed
SYSTEM
WIRING
DIAGRAM
—
Diagnostic procedure
STEP
INSPECTION
ACTION
1
RECORD THE CAR CONFIGURATION DATA
Switch the ignition to off.
Switch the ignition ON (engine off) and wait
for
10 s or more
.
Switch the ignition to off and wait for
3 s or
more
.
Switch the ignition ON (engine off) and wait
for
3 s or more
.
Go to the next step.
VERIFY THAT THE SAME DTC IS NOT PRESENT
