DSC HU/CM REMOVAL/INSTALLATION
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id041500801000.html[1/7/13 9:36:09 AM]
2. Apply protective tape to the connector to prevent brake fluid from entering.
3. Disconnect the brake pipes.
Brake Pipe Installation Note
1. Align the marks made before removal and install the brake pipe to the DSC HU/CM and brake pipe joint
referring to the figure.
2. Tighten the brake pipe to the specified torque using the commercially available flare nut wrench.
DSC HU/CM Connector Installation Note
1. Connect the connector and pull the lock lever up in the direction of the arrow.