REAR BRAKE (DISC) INSPECTION
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id041100800400.html[1/7/13 9:34:29 AM]
Lateral runout inspection
1. To secure the disc plate and the hub, insert the washer (thickness
10 mm {0.39 in}
, inner diameter
more than 12 mm
{0.47 in}
) between each hub bolt and the hub nut, then tighten all the hub nuts.
NOTE:
The component parts of the
SST
(49 B017 001 or 49 G019 003) can be used as a suitable washer.
2. After tightening all the hub nuts to the same torque, put the dial gauge on the friction surface of the disc plate
10 mm
{0.39 in}
from the disc plate edge.
