GENERAL PROCEDURES (BRAKE)
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id041000800100.html[1/7/13 9:32:13 AM]
2013 - CX-5 - Brakes
GENERAL PROCEDURES (BRAKE)
Wheel and Tire Installation
1. When installing the wheels and tires, tighten the wheel nuts in a criss-cross pattern to the
following tightening torque.
Tightening torque
108—147 N·m {12—14 Kgf·m, 80—108 ft·lbf}
Brake Lines Disconnection
1. If any brake line has been disconnected during the procedures, add brake fluid, bleed the
brakes, and inspect for leakage after the procedure has been completed.
CAUTION:
Brake fluid will damage painted surfaces. Be careful not to spill any on painted surfaces. If
it is spilled, wipe it off immediately.
Brake Pipe Flare Nut Tightening
1. Tighten the brake pipe flare nut using any commercially available flare nut wrench.
Connector Disconnection
1. Disconnect the negative battery cable before performing any work that requires handling of
