DTC C0030:07/C0031:07/C0031:29/C0031:2F/C0031:64/C0033:07/C0034:07/C0034:29/C0034:2F/C0034:64/C0036:07/C0037:07/C0037:29/C0037:2F/C0037:64/C0039:07/C003A:07/C003A:29/C003A:2F/C003A:64 [DYNAMIC STABILITY CONTROL (DSC)]
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id0402b2906100.html[1/7/13 9:29:01 AM]
Continuous ABS operation
Diagnostic procedure
STEP
INSPECTION
ACTION
1
INSPECT PID FOR ABS WHEEL-SPEED SENSOR OUTPUT ERROR USING M-MDS
Switch the ignition to off.
Connect the M-MDS to the DLC-2.
Select the following PIDs using the M-MDS:
WSPD_SEN_LF
WSPD_SEN_LR
WSPD_SEN_RF
WSPD_SEN_RR
Drive the vehicle.
Verify that the vehicle speeds detected by the four ABS wheel-speed sensors are approximately the same.
Are the vehicle speeds approximately the same?
YesGo to Step 3.
No Go to the next step.
2
INSPECT FOR SHORT TO GROUND BETWEEN ABS WHEEL-SPEED SENSOR CONNECTORS AND GROUND
Disconnect the ABS wheel-speed sensor connectors.
YesGo to the next step.
