PRECAUTION [DYNAMIC STABILITY CONTROL (DSC)]
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id0403b2804100.html[1/7/13 9:31:20 AM]
If engine starts and runs, perform the following steps at idle.
3. Access PIDs for the switch or sensor you are inspecting.
4. Vibrate the sensor slightly with your finger.
If PID value is unstable or malfunction occurs, check for poor connection and/or
poorly mounted sensor.
Malfunction data monitor method
1. Perform malfunction reappearance test according to malfunction reappearance mode and
malfunction data monitor. The malfunction cause is found in the malfunction data.
Connector terminal check method
1. Check the connection condition of each female terminal.
2. Insert male terminal; fit female terminal size to female terminal and check to see whether
malfunction is in female terminal or not.
© 2012 Mazda North American Operations, U.S.A.
