Matrix ETERNITY NE System Manual Download

Page: 849 / 996

Matrix ETERNITY NE System Manual

839

•

Select the Type of Trunk Auto Answer for the Day and for the Night as:

For all Calls

When Busy

You may select the same or different options for the Day and Night, according to your requirement.

•

Select the

Trunk Auto Answer Greeting message

, the

Trunk Auto Answer Ring Back Tone

Message

, and the

Trunk Auto Answer Busy Bye Message

for the Day and Night.

You may select different Greeting, Ring Back Tone and Busy Bye Message for each time zone.

For detailed instructions, see

•

“CO Trunks”

•

“Mobile Trunks”

•

“SIP Trunks”

Configure the Trunk Auto Answer related

Timers

, if required. The following Timers are of relevance to the

Trunk Auto Answer Feature:
•

The DID Inactivity Timer (default: 60 seconds)

•

The Ring Back Tone Timer (default: 45 seconds)

•

The Busy Tone Timer (default: 7 seconds)

•

You may change the duration of these timers from the

“System Timers and Counts”

page under

Advanced Settings

The Ring Back Timer and the Busy Tone Timer are also applicable for the Ring Back Tone and the Busy
Tone played for internal calls.

Record and assign Voice Modules for the following Voice Messages related to this feature:
•

Trunk Auto Answer Greeting Message.

•

Trunk Auto Answer Ring Back Tone Message

•

Trunk Auto Answer Busy Bye Message

For each of these messages, you can record four different messages.

Summary of Contents for ETERNITY NE





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNITY NE

Reviews:

Related manuals for ETERNITY NE

Brands by name

Popular brands

Matrix ETERNITY NE, System Manual

Search results

Summary of Contents for ETERNITY NE

Reviews:

Related manuals for ETERNITY NE

Brands by name

Popular brands